Material – Case + Back HQ Stainless Steel 316L surgical grade
Description – Crystaltimes in-house designed chunky “tool look” DIVERS crown at 3 case complete with case back. Drilled through lugs* and He** valve at 9. Tested to 350M with standard oem 2.8mm crystal Compatible with all SKX007 parts***
Dimensions – The same dimensions as the SKX007 0020 case – 22mm lug width, lug to lug dimension, thickness, width, height all as SKX007. It looks a little larger than the SKX007 as we went for the flat sided design and moving the crown to the 3 position but in actuality the dimensions are pretty much the same as the classic SKX007 0020 case
INFO – Crown stem length same as SXK007 OEM and out CT700 case so if you have purchased a crown from us CT208 CT209 CT218 CT228 with cut and fitted stem it will fit straight in to the CT701
* Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case
** Fully Functional Helium Gas Release Valve at 9
*** We can guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have 4 different SKX007 bezels in the hope that you may consider purchasing your bezel from us
Designed especially for the NH35/36 NE15 crown at 3 movements enabling them to be dropped straight in, no need to change the grey movement holder. A special case back is supplied with built in spacer – needed when using the NH35/36 with standard grey movement holder. Should you choose to use the thicker black movement holder the oem case back or our CT200 case back would need to be used
Included FREE with every case – Crystal Gasket – Case Back Gasket – 2 x 22m Fat Spring Bars
Finish – High Polish flat sides and underside – Brushed Top
Information – Case Body + Back – Drilled Lugs. All oem parts are compatible and will fit this replacement case incl the oem Jubilee Bracelet. Takes fat 2.5mm spring bars.
NOTE – Aftermarket bracelets with SEL may in some rare instances require a slight adjustment on the SEL as they do even with the oem case in some instances
Water Resistance – As oem*
*This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.
A great basis for a custom build or as a replacement for SKX007 0020 case
Price 99.95 USD
Free* – 1st class registered international airmail
Epost – Economy Airmail with online tracking – Strongly recommended
EMS – Expedited fast courier – For high value and urgent orders
* Free post option not available for all destinations
Additional info – Ideal for replacing a badly damaged case or building a complete custom 1 off mod without having to buy a complete watch and ending up only using the case!